See, explore and analyse your energy use with our simple energy monitoring solutions

Different people digest information about energy in very different ways. In-home displays, smart phone apps and web services all play a role in informing consumers. We understand that there is no one energy monitoring device that can do everything – so instead we offer a range to suit every home and lifestyle.

buy

Shop our range of energy monitors

Minim+ energy monitor
£34.95
Minim+ Electricity Monitor (with LED Sensor)
£34.95
geo Solo II Energy Monitor with Internet Bridge
£79.95
geo Solo II Energy Monitor
£54.95
Sale!

Minim+ energy monitor

The Minim+ electricity display uses a simple and intuitive monitor to help people engage with their energy habits. Using intelligent graphics – like a speedometer to show current energy use and a budget bar to help keep track of costs – the Minim+ gives energy control back to homeowners.

£39.95 £34.95

The Minim+ is a simple, self-installed display that uses a CT clip reader and a wireless transmitter for accuracy, reliability and range. If you’re looking for something simple and great value then the Minim+ is the electricity monitor for you.

Description

Great value, colour energy monitor to help you control your energy consumption.

  • Which? Best Buy Award for best energy monitor
  • Easy to self-install, easy to use (not designed for homes with solar PV installed)
  • Colour display for great visibility and style
  • Keep track of energy use against budget
  • See energy cost in ££, CO2 or kWh
  • Live data plus historical record for comparison
  • CT-Clip sensor* for single phase electricity meters 
  • Shows room temperature on display
  • Supports up to 3 electricity tariffs and daily standing charge; works with Economy 7 tariffs
  • Stores up to 1 month of usage history

*The CT clip measures current and although pretty accurate all CT have a degree of inaccuracy.

See the user manual for more installation information.

How to connect a CT sensor

The CT simply clips to one of the cables that goes in our out of your electricity meter.

Open the side of the clip using the tab, wrap it around one of ‘live’ main cables to the meter and then snap it closed. The ‘live’ cables are usually marked with an ‘L’ and brown in colour. If connected to one of the other cables ‘neutral’ or ‘N’, the readings might be inaccurate or not report anything at all.

You should hear a click when the CT has been closed securely.

If your package included 3x CT sensors, then you will need to repeat this step for all three sensors and make sure you connect them to the three different live cables to your meter. These will typically be labelled L1, L2 and L3.

Connecting the sensor to the transmitter

Once you have attached the sensor to the meter (step 1), you need to connect the end of the lead to the transmitter.

Simply connect the connector to any of the holes on the bottom of the sensor.

Now remove the back of the transmitter by pressing the button on the back and sliding the cover upwards. Remove the pullout battery tab and then replace the transmitter cover.

Sale!

Minim+ Electricity Monitor (with LED Sensor)

£39.95 £34.95

The Minim+ electricity display uses a simple and intuitive monitor to help people engage with their energy habits. Using intelligent graphics – like a speedometer to show current energy use and a budget bar to help keep track of costs – the Minim+ gives energy control back to homeowners.

The Minim+ is a simple, self-installed display that uses a CT clip or LED reader and a wireless transmitter for accuracy, reliability and range. If you’re looking for something simple and great value then the Minim+ is the electricity monitor for you.

This is the LED sensor version

Description

Great value, colour energy monitor to help you control your energy consumption.

  • Which? Best Buy Award for best energy monitor
  • Easy to self-install, easy to use (not designed for homes with solar PV installed)
  • Colour display for great visibility and style
  • Keep track of energy use against budget
  • See energy cost in ££, CO2 or kWh
  • Live data plus historical record for comparison
  • CT-Clip sensor for single phase electricity meters or LED sensor for modern meters (single or three phase) with a flashing pulse output
  • Shows room temperature on display
  • Supports up to 3 electricity tariffs and daily standing charge; works with Economy 7 tariffs
  • Stores up to 1 month of usage history

CT clip or LED sensor –  which one is best for me? The LED sensor is more accurate than the CT clip as all it does is count pulses. The CT clip measures current and although pretty accurate all CT have a degree of inaccuracy. You can only use the LED sensor if you have a modern meter with a flashing light on the front (this is easy to check by looking at the front of your electricity meter). If in doubt, go for the CT clip as this can be used whatever type of meter you have.

See the user manual for more installation information.

How to connect a CT sensor

The CT simply clips to one of the cables that goes in our out of your electricity meter.

Open the side of the clip using the tab, wrap it around one of ‘live’ main cables to the meter and then snap it closed. The ‘live’ cables are usually marked with an ‘L’ and brown in colour. If connected to one of the other cables ‘neutral’ or ‘N’, the readings might be inaccurate or not report anything at all.

You should hear a click when the CT has been closed securely.

If your package included 3x CT sensors, then you will need to repeat this step for all three sensors and make sure you connect them to the three different live cables to your meter. These will typically be labelled L1, L2 and L3.

Connecting the LED sensor

Use the supplied loop & hook sticky pad to attach the LED sensor to the front of the meter. You may need to remove the middle of the sticky pad so as not to obscure the LED on the meter.

Firmly affix the LED sensor to the sticky pad, making sure to align the middle of the sensor over the hole in the pad.

Connecting the sensor to the transmitter

Once you have attached the sensor to the meter (step 1), you need to connect the end of the lead to the transmitter.

Depending on whether you have a CT or LED sensor, the connector will be slightly different, but simply connect it to any of the holes on the bottom of the sensor.

Now remove the back of the transmitter by pressing the button on the back and sliding the cover upwards. Remove the pullout battery tab and then replace the transmitter cover.

Checking the display

As soon as the transmitter battery tab is removed it will start to transmit energy information to your display.

The display will flash the upper part of the screen until it receives a signal from the transmitter. Once you see the dial on the display, everything is connected and working.

geo Solo II Energy Monitor with Internet Bridge

The Solo II is geo‘s complete view in-home display that shows you how much energy you’re using in as much detail as you’d like to know. From the price of a hot drink to the carbon cost of your washing, you can keep track of consumption, spend and environmental impact.

Out of stock

The geo Web Pack (included with this pack) gives you access to our FREE online energy service, energy note, where you can analyse your energy habits, set budgets & tariffs and use of Smart Plugs to turn your appliances on and off remotely from your smartphone, tablet or PC.

*Please note this product will not work accurately if you have a solar installation.

Description

  • Easy to self-install, easy to use (not designed for homes with solar PV installed)
  • Colour display for great visibility and style
  • Keep track of energy use against budget
  • See energy cost in ££, CO2 or kWh
  • Live data plus historical record for comparison
  • Shows room temperature on display
  • Supports up to 3 electricity tariffs and daily standing charge; works with Economy 7 tariffs
  • Stores up to 1 month of usage history

Extend the smart home functionality with the geo Internet Bridge to access live and historic data from any connected device. The Internet Bridge gives free access to geo’s energynote® web service showing live and historic information on energy consumption and cost. It shows the trends and offers analysis plus it enables the geo Smart Plug functionality. Smart plugs allow you to monitor and control different appliances in the home enabling you to spot the big energy guzzlers and ensure you are only using appliances when you need to. The Solo II can also be extended with an additional Temperature Sensor to compare with the built-in temperature sensor on the display. Position the additional Temperature sensor outside or on a hot water pipe and you start to get a more detailed picture.

The Solo II uses the 868MHz radio frequency which is ideal for wirelessly sending data within the home – geo’s private Legato protocol, coupled with 868MHz radio, ensures security and excellent range (over 30m from the transmitter to the display)

Installation:

Fitting the sensor is safe, simple and can be done by anybody. Simply take the CT clip sensor and connect to the mains cable going into your meter – the transmitter that the sensor is connected to will automatically start sending data to the display – it’s that simple. See the Quick Start Guide for further installation information.

geo Solo II Energy Monitor

The Solo II is geo‘s complete view in-home display that shows you how much energy you’re using in as much detail as you’d like to know.

£54.95

From the price of a hot drink to the carbon cost of your washing, you can keep track of consumption, spend and environmental impact. 

*Please note this product is not suitable for use with Solar Panels

Description

*Please note this pack contains a display only (no Internet Bridge)

  • Easy to self-install, easy to use (not designed for homes with solar PV installed)
  • Colour display for great visibility and style
  • Keep track of energy use against budget
  • See energy cost in ££, CO2 or kWh
  • Live data plus historical record for comparison
  • Three CT-Clip sensors supplied for single or three phase electricity meters
  • Shows room temperature on display
  • Supports up to 3 electricity tariffs and daily standing charge; works with Economy 7 tariffs
  • Stores up to 1 month of usage history

Extend the smart home functionality with the geo Internet Bridge to access live and historic data from any connected device. The Internet Bridge gives free access to geo’s energynote web service showing live and historic information on energy consumption and cost. It shows the trends and offers analysis plus it enables the geo Smart Plug functionality. Smart plugs allow you to monitor and control different appliances in the home enabling you to spot the big energy guzzlers and ensure you are only using appliances when you need to. The Solo II can also be extended with an additional Temperature Sensor to compare with the built-in temperature sensor on the display. Position the additional Temperature Sensor outside or on a hot water pipe and you start to get a more detailed picture.

The Solo II uses the 868MHz radio frequency which is ideal for wirelessly sending data within the home – geo’s private Legato protocol, coupled with 868MHz radio, ensures security and excellent range (over 30m from the transmitter to the display)

 Installation:

Fitting the sensor is safe, simple and can be done by anybody. Simply take the CT clip sensor and connect to the mains cable going into your meter – the transmitter that the sensor is connected to will automatically start sending data to the display – it’s that simple. See the Quick Start Guide for further installation information.