Protect your home from water leaks and water damage

Water damage, including flooding caused by burst pipes or mould due to excess humidity, is the single largest risk to UK homes. Waterlock minimises this risk with its early detection and ability to instantly shut off the mains water supply

buy

Shop for Waterlock

Waterlock 6 sensor pack (self install)
£329.95
Waterlock 6 sensor pack (with installation)
£449.95
Waterlock 3 sensor pack (with installation)
£395.95
Waterlock leak detector extension cable (4m length)
£34.95
Waterlock 3 sensor pack (self install)
£275.95
Additional Waterlock Sensor – Temperature, Humidity & Standing Water Sensor
£24.95

Waterlock 6 sensor pack (self install)

Protect your home from water leaks and water damage with Waterlock, the leak protection and mains water shut-off system.

Waterlock gives customers peace of mind and control of their home’s water supply whether home or away. Unlike most systems on the market today, it not only detects standing water, low temperature and high humidity conditions, but can instantly shut off the mains water supply automatically without any manual intervention.

IMPORTANT: Before purchasing Waterlock, you must ensure that the product is suitable for your home. The system is only compatible with 15mm or 22mm copper or plastic pipes (not lead) which are in good condition. There must be ample access to the stopcock and surrounding area for the system to be fitted.

To help you establish whether your home is suitable, please watch this video before proceeding with your purchase.

This package is for self-installation.

Clear

Modern design – contemporary look and feel

Temperature alerts – to avoid pipes freezing in low temperatures

Standing water alerts – limit the damage caused by the escape of water when the mains water automatically shuts off

Battery powered – no need for mains power, the batteries in the Valve Controller and Sensors last up to two years. You can even check the status of battery levels in the Waterlock App

Multiple Sensors – you can have up to 12 sensors connected to the Waterlock system. This will help to cover multiple areas of risk

Independent of your broadband – if your internet goes down, Waterlock will still work to protect your home against escape of water

The Waterlock app is available for both iOS and Android devices.

Description

Detection and action – Waterlock not only detects leaks but also closes the valve automatically. Leaks can be detected by the sensors placed around the home, either by the presence of standing water or an increase in humidity levels in the area. You can also remotely control the mains water with the valve using through the app.

The Waterlock app simply and remotely manage the home’s water supply. The app also provides notifications at the first sign of a leak, change in humidity or temperature. 

System components:

  • Valve with installation guide
  • 6x wireless sensors
  • Hub
  • Valve controller
  • App (iOS and Android)

Installation:

This package is for self-install only, it does not include installation.

Pre purchase advice:

Before purchasing your Waterlock system, we advise checking your house is compatible and you will also need to have a few pieces of information to hand.

View our video to find out how.

Related products

  • Waterlock Sensor

    Additional Waterlock Sensor – Temperature, Humidity & Standing Water Sensor

    £24.95

  • Waterlock 3 sensor pack (with installation)

    £395.95

  • Waterlock 3 sensor pack (self install)

    £275.95
  • extension cable

    Waterlock leak detector extension cable (4m length)

    £34.95

Waterlock 6 sensor pack (with installation)

Protect your home from water leaks and water damage with Waterlock, the leak protection and mains water shut-off system.

Waterlock gives customers peace of mind and control of their home’s water supply whether home or away. Unlike most systems on the market today, it not only detects standing water, low temperature and high humidity conditions, but can instantly shut off the mains water supply automatically without any manual intervention.

IMPORTANT: Before purchasing Waterlock, you must ensure that the product is suitable for your home. The system is only compatible with 15mm or 22mm copper or plastic pipes (not lead) which are in good condition. There must be ample access to the stopcock and surrounding area for the system to be fitted.

To help you establish whether your home is suitable, please watch this video before proceeding with your purchase.

This package includes professional installation, once your purchase has been completed, you will receive an email with a link to book your installation with our installation partner.

Clear

Modern design – contemporary look and feel

Temperature alerts – to avoid pipes freezing in low temperatures

Standing water alerts – limit the damage caused by the escape of water when the mains water automatically shuts off

Battery powered – no need for mains power, the batteries in the Valve Controller and Sensors last up to two years. You can even check the status of battery levels in the Waterlock App

Multiple Sensors – you can have up to 12 sensors connected to the Waterlock system. This will help to cover multiple areas of risk

Independent of your broadband – if your internet goes down, Waterlock will still work to protect your home against escape of water

The Waterlock app is available for both iOS and Android devices.

Description

Detection and action – Waterlock not only detects leaks but also closes the valve automatically. Leaks can be detected by the sensors placed around the home, either by the presence of standing water or an increase in humidity levels in the area. You can also remotely control the mains water with the valve using through the app.

The Waterlock app simply and remotely manage the home’s water supply. The app also provides notifications at the first sign of a leak, change in humidity or temperature. 

System components:

  • Valve with installation guide
  • 6x wireless sensors
  • Hub
  • Valve controller
  • App (iOS and Android)

Installation:

This package includes professional installation, once your purchase has been completed, you will receive an email with a link to book your installation with our installation partner.

Pre purchase advice:

Before purchasing your Waterlock system, we advise checking your house is compatible and you will also need to have a few pieces of information to hand.

View our video to find out how.

Related products

  • Waterlock 6 sensor pack (with installation)

    £449.95
  • Waterlock Sensor

    Additional Waterlock Sensor – Temperature, Humidity & Standing Water Sensor

    £24.95
  • extension cable

    Waterlock leak detector extension cable (4m length)

    £34.95

  • Waterlock 3 sensor pack (self install)

    £275.95

Waterlock 3 sensor pack (with installation)

Protect your home from water leaks and water damage.

The Waterlock connected leak detection system gives you peace of mind and control of your home’s water supply whether you’re home or away. Unlike most systems on the market today, it not only detects standing water, low temperature and high humidity conditions, but also offers the ability to instantly shut off the mains water supply.

IMPORTANT: Before purchasing this product, you must ensure that the product is suitable for your home. Waterlock is only suitable for homes that have 15mm or 22mm copper or plastic pipes (not lead) which are in good condition, with sufficient access to the stopcock and surrounding area. To help you establish whether your home is suitable, please watch this video before proceeding with your purchase.

This product includes professional installation. Details on booking your installation will be provided after purchase.

Clear

Modern design – sleek, contemporary look

Temperature alerts – avoid freezing pipes by being alerted to low temperatures

Humidity alerts – mould can cause damage and also have health implications

Standing water – limit the damage of an escape of water by having the mains water automatically shut off

Battery powered – no need for mains power and the batteries last up to two years (battery levels reported on the Waterlock App)

Multiple Sensors – you can have up to 12 sensors connected to your Waterlock system to cover all areas at risk

This pack includes 3 sensors as standard

Independent of your broadband – if your internet goes down, Waterlock will still work to protect your home against escape of water

Slimline water control valve to enable quick and easy installation (less than 1 hour)

iOS and Android app allows you to control your mains water (if you leave your home unattended) and alert you to changes in humidity, temperature and standing water

Description

Protect your home from water leaks and water damage.

Detection and action – Waterlock not only detects leaks but also takes mitigating action to close the Valve automatically. Leaks can be detected by the sensor, either by the presence of standing water or an increase in humidity levels. You can also remotely open the Valve using the mobile App.

User-friendly App – our app provides the ability to simply and remotely manage your home’s water supply. The app also provides notifications at the first sign of a leak, change in humidity or temperature.

System components:

  • Valve with installation guide
  • 3x wireless sensors (temperature, humidity and water)
  • Hub
  • Valve controller
  • App (iOS and Android)

Installation:

Once purchase has been completed, you will receive an email with a link to book your installation with our installation partner.

Pre purchase advice:

Before purchasing your Waterlock system, we advise checking your house is compatible and you will also need to have a few pieces of information to hand.

View our video to find out how.

Related products

  • Waterlock 3 sensor pack (self install)

    £275.95
  • extension cable

    Waterlock leak detector extension cable (4m length)

    £34.95

  • Waterlock 6 sensor pack (with installation)

    £449.95

  • Waterlock 3 sensor pack (with installation)

    £395.95
extension cable
extension cable

Waterlock leak detector extension cable (4m length)

£34.95

This extension cable enables your existing Waterlock system to extend its leak detection range. The extension cable can detect standing water along its entire length making it perfect for a number of applications including:

  • Running behind the white goods in a kitchen or utility room
  • Placing under a shower tray or bath unit
  • In a roof space near a water tank or water pipes

The cables are not suitable for high humidity environments where condensation may occur on the cable surface

Description

The extension cable is quick and easy to connect to an existing sensor (push in and the connector clicks into place) and is even supplied with clips to keep it in position wherever you decide to locate it. If the cable is exposed to standing water, then the main sensor it is connected to will send its ‘water shutoff’ command as normal, whilst alerting you via the app and email. The cable is quick to dry so it can be re-laid soon after an event and continue doing its job of protecting your home.

Features:

  • 4m in length
  • 5mm diameter
  • Colour – blue
  • Only one cable per main sensor
  • Supplied with x 5 securing clips

Related products

  • Waterlock 6 sensor pack (with installation)

    £449.95

  • Waterlock 3 sensor pack (with installation)

    £395.95
  • extension cable

    Waterlock leak detector extension cable (4m length)

    £34.95

  • Waterlock 3 sensor pack (self install)

    £275.95

Waterlock 3 sensor pack (self install)

Protect your home from water leaks and water damage.

The Waterlock connected leak detection system gives you peace of mind and control of your home’s water supply whether you’re home or away. Unlike most systems on the market today, it not only detects standing water, low temperature and high humidity conditions, but also offers the ability to instantly shut off the mains water supply.

IMPORTANT: Before purchasing this product, you must ensure that the product is suitable for your home. Waterlock is only suitable for homes that have 15mm or 22mm copper or plastic pipes (not lead) which are in good condition, with sufficient access to the stopcock and surrounding area. To help you establish whether your home is suitable, please watch this video before proceeding with your purchase.

This product is self install. You will need to arrange for installation yourself. If you are purchasing Waterlock as part of an insurance policy, you may be required to purchase a Waterlock product that includes installation.

Clear

Modern design – sleek, contemporary look

Temperature alerts – avoid freezing pipes by being alerted to low temperatures

Humidity alerts – mould can cause damage and also have health implications

Standing water – limit the damage of an escape of water by having the mains water automatically shut off

Battery powered – no need for mains power and the batteries last up to two years (battery levels reported on the Waterlock App)

Multiple Sensors – you can have up to 12 sensors connected to your Waterlock system to cover all areas at risk

This pack includes 3 sensors as standard

Independent of your broadband – if your internet goes down, Waterlock will still work to protect your home against escape of water

Slimline water control valve to enable quick and easy installation (less than 1 hour)

iOS and Android app allows you to control your mains water (if you leave your home unattended) and alert you to changes in humidity, temperature and standing water

Description

Protect your home from water leaks and water damage.

Detection and action – Waterlock not only detects leaks but also takes mitigating action to close the Valve automatically. Leaks can be detected by the sensor, either by the presence of standing water or an increase in humidity levels. You can also remotely open the Valve using the mobile App.

User-friendly App – our app provides the ability to simply and remotely manage your home’s water supply. The app also provides notifications at the first sign of a leak, change in humidity or temperature.

System components:

  • Valve with installation guide
  • 3x wireless sensors (temperature, humidity and water)
  • Hub
  • Valve controller
  • App (iOS and Android)

Installation:

This product is self install and you will need to arrange for installation yourself. If you are purchasing Waterlock as part of an insurance policy, you may be required to purchase a Waterlock product that includes installation.

Pre purchase advice:

Before purchasing your Waterlock system, we advise checking your house is compatible and you will also need to have a few pieces of information to hand.

View our video to find out how.

Related products

  • Waterlock 3 sensor pack (self install)

    £275.95

  • Waterlock 3 sensor pack (with installation)

    £395.95

  • Waterlock 6 sensor pack (with installation)

    £449.95
  • Waterlock Sensor

    Additional Waterlock Sensor – Temperature, Humidity & Standing Water Sensor

    £24.95
Waterlock Sensor

Additional Waterlock Sensor – Temperature, Humidity & Standing Water Sensor

£24.95

The Waterlock Sensor is used to detect temperature, standing water and changes in humidity.

If one of these risks is detected by the Sensor, Waterlock will notify you via the app and email so you can investigate and take action if required.

If a Waterlock Sensor detects standing water, it will also check if your mains water supply is turned off and if it isn’t, it will automatically do that for you.

Description

The Waterlock Sensor is used to detect temperature, standing water and changes in humidity.

 

  • Modern design – sleek, modern look
  • Temperature – avoid freezing pipes by being alerted to low temperatures
  • Humidity – mould can cause damage and also have health implications
  • Standing water – limit the damage of an escape of water by having the mains water automatically shut off
  • Wireless – sends its data wirelessly so its positioning is flexible
  • Battery powered – no need to plug it in and the batteries last up to two years (battery levels reported on the Waterlock App)

For guidance on where to place your Sensors, click here.

PLEASE NOTE: You can have a maximum of 12 sensors connected to your Waterlock system, this is to cover multiple areas at risk

Related products

  • Waterlock 3 sensor pack (self install)

    £275.95

  • Waterlock 3 sensor pack (with installation)

    £395.95
  • Waterlock Sensor

    Additional Waterlock Sensor – Temperature, Humidity & Standing Water Sensor

    £24.95

  • Waterlock 6 sensor pack (with installation)

    £449.95